CDL general knowledge test: what the manual covers and how to study it

Published

The general knowledge test is the knowledge test taken by all CDL applicants. Your state’s CDL manual is the main source to study from. This guide walks through the Florida Commercial Driver’s License Manual (version July 2022) using its own headings, then suggests how to use a practice quiz next to it.

Start with what the manual is and is not

Section 1 opens by saying there is a federal requirement that each state have minimum standards for the licensing of commercial drivers. It then says it provides driver license testing information, but does NOT provide information on all the federal and state requirements needed before you can drive a commercial motor vehicle. You may have to contact your state driver licensing authority for more. It adds that some states may include more drivers and vehicles in their CDL programs, and that going beyond the federal standard is acceptable.

This is Florida’s edition, and its disclaimer calls it an informational guide, with legal authority found in Chapters 316, 318 and 322 of the Florida Statutes. If you will test in another state, use that state’s manual. The manual also says that formal training is the most reliable way to learn the special skills of driving a large commercial vehicle and that the manual is not a substitute for a truck driver training class or program.

Section 1, Introduction: the tests and the classes

Section 1 covers CDL tests, medical requirements, driver disqualifications, other safety rules and the International Registration Program. It explains when you need a CDL, for example for a single vehicle with a gross vehicle weight rating of 26,001 pounds or more, or a vehicle designed to transport 16 or more passengers including the driver, and it describes the three vehicle classes.

On the tests, the manual says you must pass knowledge and skills tests to get a CDL or CLP. You take one or more knowledge tests depending on your class and endorsements. The list starts with the general knowledge test, taken by all applicants, and continues with passenger transport, air brakes, combination vehicles, hazardous materials, tank vehicle, doubles/triples and school bus tests. If you pass the required knowledge tests you can take the skills test, which has three segments: vehicle inspection, basic vehicle control and on-road driving. Figure 1.2 shows which sections to study for each class and endorsement.

Section 2, Driving Safely

Section 2 states that it contains knowledge and safe driving information that all commercial drivers should know, and that you must pass a test on this information to get a CDL. It does not have specific information on air brakes, combination vehicles, doubles or passenger vehicles. The headings, in the manual’s order, are: Vehicle Inspection, Basic Control of Your Vehicle, Shifting Gears, Seeing, Communicating, Space Management, Controlling Your Speed, Seeing Hazards, Distracted Driving, Aggressive Drivers/Road Rage, Night Driving & Driver Fatigue, Driving in Fog, Winter Driving, Hot Weather Driving, Railroad-highway Crossings, Mountain Driving, Driving Emergencies, Antilock Braking Systems, Skid Control and Recovery, Accident Procedures, Fires, Alcohol, Other Drugs, and Driving, and Hazardous Materials Rules.

Section 2 is also the base for other tests. The manual says the passenger endorsement requires a knowledge test on Sections 2 and 4, and it tells tank vehicle and doubles/triples applicants to also study Section 2. For the vehicle inspection test it says to review Section 11 as well. Section 2 has basic hazardous materials information that all drivers should know; if you need a HazMat endorsement, the manual says to study Section 9.

Section 3, Transporting Cargo Safely

Section 3 covers inspecting cargo, cargo weight and balance, securing cargo and cargo needing special attention. The manual says you must understand basic cargo safety rules to get a CDL. Whether or not you load the cargo yourself, it lists your responsibilities: inspecting your cargo, recognizing overloads and poorly balanced weight, knowing the cargo is properly secured and does not block your view, and knowing it does not restrict your access to emergency equipment. It also says to inspect the cargo and its securing devices again within the first 50 miles of a trip.

The manual does not list the general knowledge test’s contents section by section; the only place it names that test is the list of knowledge tests in Section 1. What it does say is that Section 2 material is tested and that basic cargo safety rules (Section 3) must be understood. Confirm any detail you are unsure about with your state licensing agency.

What the other sections are for

Sections 4 to 10 cover the endorsement subjects: Transporting Passengers Safely, Air Brakes, Combination Vehicles, Doubles and Triples, Tank Vehicles, Hazardous Materials and School Buses. The manual says to read the Air Brakes section if you want to drive a truck or bus with air brakes, or pull a trailer with air brakes. Sections 11, 12 and 13, Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-road Driving, prepare you for the three skills test segments. Read only the sections that Figure 1.2 assigns to your class and endorsements.

Using a practice quiz alongside the manual

Our CDL practice quiz has 70 questions drawn from Sections 2 and 3. It leaves out Florida-only rules, fees and penalties, and it does not cover air brakes, combination vehicles, tank vehicles or the hazardous materials endorsement. One question comes from the manual’s hazardous materials rules for all commercial drivers (2.23). The quiz has no pass mark. The manual states neither a number of exam questions nor a pass mark, so treat your score as a signal about what to re-read, not a prediction of the real result.

As advice, work in short loops. Read one subsection, answer the related quiz questions, then go back to the manual for each one you missed. The manual also has its own “Test Your Knowledge” questions at the end of its subsections, which are good for a second pass. Use the quiz to find gaps, not as a replacement for the manual or for training.

Frequently asked questions

Is the Florida CDL Manual the right manual for my state?
Only if you test in Florida. The manual says it does not cover every federal and state requirement and that you may have to contact your state driver licensing authority. Use your own state’s manual as the final word.
Which manual sections should I study for the general knowledge test?
The manual says Section 2 is knowledge you must pass a test on to get a CDL, and that you must understand the basic cargo safety rules in Section 3. Figure 1.2 in the manual shows which sections to study for each class and endorsement. Confirm details with your licensing agency.
How many questions are on the real test and what is the pass mark?
The manual does not state either one. Ask your state driver licensing authority. Our practice quiz has 70 questions and no pass mark.
Can a practice quiz replace training?
No. The manual says it is not a substitute for a truck driver training class or program, and a quiz is a smaller tool still. Use it to check what you remember.

Sources

AH Software is not affiliated with any government agency, motor vehicle department or military branch, or with the organizations that publish the documents listed under Sources. This guide summarizes those public documents and is general information, not legal advice. Always check the official source for the current rules.